Product Catalog

Equipment and Spares,
built for the long haul.

6 core categories. 19 distinct product lines. Every system in our catalog is precision-engineered for continuous industrial duty, whether you’re sourcing a complete conveyor, a single impact idler, or a custom wear liner.

19
Product Lines
6
Categories
20+
Years
01 / Bulk Transport

Conveying Systems

Continuous-duty conveying systems engineered for high-throughput bulk material handling across mining, cement, coal handling, and power plant operations.

Product Lines
4 lines
Belt Conveyor01

The backbone of bulk material transport.

Belt Conveyor

  • Troughed, flat, and steep incline layouts for distances up to several kilometers
  • Impact idlers at loading points with heavy duty return idlers and continuous duty drives
  • Custom belt widths and drive arrangements matched to site layout
Mining and mineral transportCoal and power plant handlingPort and terminal bulk handling
Bucket Elevator02

Vertical material lifting smooth, continuous, and dust-free.

Bucket Elevator

  • Centrifugal discharge for high capacity, continuous discharge for fragile feeds
  • Fully enclosed casing for dust free vertical transport
  • Handles grain, cement, fly ash, fertilizer, sugar, and chemical powders
Grain and agricultural product elevationCement and fly ash vertical transportFertilizer and chemical plant handling
Drag Chain Conveyor03

Heavy-duty enclosed transport for demanding applications.

Drag Chain Conveyor

  • Sealed steel trough handles dusty, hot, and abrasive feeds
  • Multiple inlet and outlet points along the length for flexible plant layouts
  • Carries coal, ash, limestone, clinker, wood chips, and biomass
Dusty, hot, or abrasive bulk material handlingCoal and ash handling from hoppers and silosLimestone and clinker conveying
Screw Conveyor04

Versatile and compact material transport and metering.

Screw Conveyor

  • Horizontal, inclined, and vertical configurations for compact installations
  • Variable pitch options for precise metering and feeding
  • Handles cement, grain, sludge, fly ash, and abrasive granules
Cement, fly ash, and clinker handlingGrain and agricultural processingChemical, sludge, and powder conveying
02 / Belt Support

Conveyor Idlers

Precision-machined idler sets that deliver smooth belt travel and long service life under impact loads, abrasive feeds, and continuous duty cycles.

Product Lines
3 lines
Impact Idlers01

Conveyor Belt Protection at High-Load Zones

Impact Idlers

  • High grade rubber rings absorb the kinetic energy of falling material
  • Reinforced steel frames built for loading zones and transfer chutes
  • Prevents belt punctures and carcass damage at high impact drop points
Belt conveyor loading zonesTransfer chutes and drop pointsHigh-impact mining, ore, and aggregate handling
Return Idlers02

Stable, Low-Friction Return Belt Support

Return Idlers

  • V return configuration delivers stable belt tracking on the return path
  • Self cleaning rollers prevent material buildup on the clean side of the belt
  • Low friction sealed bearings cut energy use on long overland systems
Return strand support on belt conveyorsLong-distance overland conveyor systemsOutdoor and heavy-duty industrial conveyors
Self-Alignment Idlers03

Proactive Belt Path Correction

Self-Alignment Idlers

  • Pivoting frame reacts instantly to belt drift and steers the belt back to centre
  • Works in both forward and reversing conveyor directions
  • Critical edge protection for long, outdoor, and high speed systems
Long belt conveyor systems prone to driftReversing conveyor systemsOutdoor conveyors subject to wind and uneven loading
03 / Drive & Tail

Conveyor Pulleys

Heavy-duty drive, redirect, and magnetic pulleys engineered for high tension, with precision-turned shells and rubber lagging matched to the duty.

Product Lines
3 lines
Head Pulley (Drive Pulley)01

Primary Powerhouse of the Conveyor System

Head Pulley (Drive Pulley)

  • Diamond pattern rubber lagging maximises traction and prevents belt slip
  • Heavy duty cast steel construction with robust shafting for high torque
  • Precision machined for smooth, vibration free drive operation
Drive end of all belt conveyor systemsHigh-torque material discharge applicationsCoal, ore, aggregate, and cement conveyor drives
Tail Pulley02

Belt Redirection and Tension Adjustment

Tail Pulley

  • Available in smooth machined or self cleaning wing styles
  • Designed to work with take up units for optimal belt tension
  • Heavy duty spherical roller bearings for long service life
Loading end of belt conveyor systemsBelt tension adjustment take-up unitsAll bulk material handling conveyor systems
Magnetic Pulley03

Automated Magnetic Separation During Discharge

Magnetic Pulley

  • Permanent rare earth magnets provide deep reach tramp iron extraction
  • Stainless steel non magnetic housing for maximum flux density
  • Protects downstream crushers and mills without manual intervention
Iron extraction from coal, aggregate, and grain streamsProtecting crushers and mills from tramp metalMineral processing and beneficiation plants
04 / Size Reduction

Crushing Equipment

Primary, secondary, and tertiary crushers built to reduce hard ore, coal, limestone, and minerals, backed by a full inventory of interchangeable wear parts.

Product Lines
3 lines
Impact Mill01

High-velocity impact for precise size reduction

Impact Mill

  • Horizontal shaft with high speed blow bars striking against breaker plates
  • High reduction ratio achieved in a single pass
  • Adjustable output via apron gap settings with interchangeable blow bars
Secondary and tertiary crushing in miningLimestone and clinker size reductionCoal and gypsum crushing
Hammer Mill02

Efficient rotating impact grinding for soft to medium hard materials

Hammer Mill

  • Rotating hammers force material through grate bars for fine, uniform output
  • Variable shaft speed and grate configurations for precise sizing
  • Low cost per tonne on coal, biomass, limestone, and soft minerals
Coal and lignite size reductionLimestone and gypsum grindingBiomass and agricultural waste processing
Single Roll Crusher03

Reliable crushing for friable, sticky, and wet materials

Single Roll Crusher

  • Toothed roll against a fixed breaker plate for compression and shear reduction
  • Open design tolerates wet, clay bearing, and sticky feeds that plug other crushers
  • Minimal fines generation with simple, low maintenance construction
Clay and wet coal crushingLimestone, salt, coke, and bauxite size reductionPrimary and secondary crushing stages
05 / Controlled Flow

Feeding Equipment

Feeders, elevators, and scrapers that draw, meter, and lift material from hoppers, bins, and stockpiles, including the wet, cohesive feeds that defeat conventional systems.

Product Lines
3 lines
Vibrating Feeder01

Smooth, controlled material flow from bin to process.

Vibrating Feeder

  • Electromechanical drive with variable frequency for precise feed rate control
  • Draws material evenly from hoppers, bins, and stockpiles
  • Low power consumption with minimal spillage and long operational life
Hopper and bin discharge to conveyorsCrusher and screen feedingWeighing system and batching plant feeding
Rotary Air Valve02

Airtight material discharge with precise flow control.

Rotary Air Valve

  • Maintains an airtight seal across the pressure differential
  • Mild steel for abrasive feed, stainless steel for food and corrosive duty
  • Meters fly ash, cement, flour, sugar, and chemical powders into pneumatic lines
Pneumatic conveying line feedingDust collector and filter unit dischargeSilo and hopper metering
Wet Scraper03

Efficient handling of wet, sticky, and cohesive materials.

Wet Scraper

  • Steel flight bars on heavy duty chain push material along a sealed trough
  • Handles wet coal, slurry, ash, bagasse, clay, and foundry sand without slippage
  • Low headroom installation with self cleaning tail sections
Wet coal and slurry handlingAsh and wet by-product removalSugarcane bagasse processing
06 / Classification

Screening Equipment

Precision screening solutions for accurate sizing, from high-throughput stratification through to flip-flow separation of wet, sticky, near-mesh feeds.

Product Lines
3 lines
Circular Motion Screen01

High efficiency multi deck screening for aggregates and minerals.

Circular Motion Screen

  • Eccentric shaft drive generates circular throw for high stratification
  • Single, double, and triple deck configurations with interchangeable screen media
  • Robust welded screen body engineered for high capacity per unit footprint
Dry aggregate and quarry product classificationIron ore and mineral sizingCoal screening and classification
Flip Flow Screen02

Breakthrough screening for wet, sticky, and near mesh materials.

Flip Flow Screen

  • Polyurethane panels alternately flex in tension and relaxation for self cleaning
  • Eliminates blinding and pegging on wet, sticky, and near mesh feeds
  • Modular panel design enables fine screening down to 0.5 mm
Wet coal and difficult mineral screeningNear-mesh aggregate separationSticky and cohesive material classification
Sizer / Grader03

Precision particle classification with adjustable aperture control.

Sizer / Grader

  • On spec crystals fall through, oversize is conveyed forward for further processing
  • All grades of sugar separated to strict quality specifications
Sugar crystal grading and classificationRecrystallization feed preparationGranular size separation in sugar refineries